How to Replace Roller Pins on Your Garage Door

0
210

Garage doors are one of the elements of our home that we take for granted. Most garage doors get opened and closed several times a day, and this is often when we are in a hurry. The last thing we need is a faulty roller garage door, so it is worth knowing how to carry out some simple maintenance on it.

According to the Good House Keeping Magazine, off-street parking in a garage adds value to a home. Make sure your home gives a great first impression by looking after your garage door.
Here’s how to replace roller pins in your garage door.

Locating the Roller Pins

The roller pins are attached to the door itself and are inserted into a track that is fixed to the frame. The majority of rollers are constructed from steel, and there inserted into a track that is fixed to the frame. The majority of rollers are constructed from steel, and there are unsealed bearings which can get clogged up with dirt and moisture. As a result, the rollers gettrack that is fixed to the frame.

The majority of rollers are constructed from steel, and there are unsealed bearings which can get clogged up with dirt and moisture. As a result, the rollers get damaged. You will know when the rollers are damaged because the movement of the door will be inhibited, and it will make a strange noise when it opens and closes.

If you have a Stanmore garage door you may want to call in some Stanmore Garage Door Repair specialists such as http://garagedoorsrus.co.uk/garage-door-repairs-stanmore/, who can help you diagnose the fault and recommend repairs.

Replacing the Roller Pins

To replace the roller pins, it is necessary to unplug the garage door and pull down on the cord so that the opener is disconnected and you can open the door manually.

Then find a location on the right track that is about three feet off the floor. Using locking pliers, bend the track open a little. Lower the door so that the bottom roller gets to this area. One person needs to hold the door whilst another clamps a set of locking pliers just about the next roller up from the bottom roller. Using a pry bar, ease the roller and the door off the track. Then you can pull out the roller pin and put a new one in. Then the roller and the door so that the bottom roller gets to this area.

One person needs to hold the door whilst another clamps a set of locking pliers just about the next roller up from the bottom roller. Using a pry bar, ease the roller and the door off the track. Then you can pull out the roller pin and put a new one in. Then the roller and the door can be pushed back into the track. Finally, remove the locking pliers and reopen the garage door. Don’t forget to bend back the track into its original position.

LEAVE A REPLY

Please enter your comment!
Please enter your name here